Upcoming Courses

Wed 7 Oct 2026

10:00 AM - 3:00 PM (5 hours)

This training session provides comprehensive information on the Ideal Logic Air monobloc heat pump system.

Wed 7 Oct 2026

10:00 AM - 3:00 PM (5 hours)

This training session provides comprehensive information on the Ideal Logic Air monobloc heat pump system.

Thu 8 Oct 2026

9:00 AM - 4:00 PM (7 hours)

An informative half day course designed to cover our commercial electric boiler product range

Thu 8 Oct 2026

9:00 AM - 4:00 PM (7 hours)

A must-have for any heating engineer, a comprehensive 1-day electrical course. This course is BPEC Certified.

Fri 9 Oct 2026

9:00 AM - 4:00 PM (7 hours)

1 day training course on the Ideal Heating POD Heat Interface Unit

Mon 12 Oct 2026

9:00 AM - 4:00 PM (7 hours)

BPEC Hot Water Storage Systems (Unvented / G3) Training Course

12 - 14 Oct 2026

3 days, 9:00 AM - 4:00 PM

Stop guessing, start diagnosing. Unlock the fault-finding skills and confidence that turn heating system and boiler breakdowns into first-time fixes.

Mon 12 Oct 2026

9:00 AM - 4:00 PM (7 hours)

This course is run over 1 day and is structured in a way that allows flexibility based on your experience.

Tue 13 Oct 2026

9:00 AM - 4:00 PM (7 hours)

A comprehensive, combined 1-day programme covering all aspects of the Evomax 2.

Wed 14 Oct 2026

10:00 AM - 3:00 PM (5 hours)

This training course is designed for experienced ASHP installers prior to installing their first HP290.

Thu 15 Oct 2026

9:00 AM - 4:00 PM (7 hours)

A comprehensive, combined 1-day programme covering all aspects of the Evomax 2.

15 - 16 Oct 2026

2 days, 9:00 AM - 4:00 PM

A practical 2-day course for qualified F Gas engineers that refreshes key procedures and guides learners through a full split air to air system installation, building the skills and confidence to install safely and to industry standards.

Thu 15 Oct 2026

9:30 AM - 3:00 PM (5 hours 30 minutes)

A dedicated half day course on our commercial gas boiler product range

Thu 15 Oct 2026

10:00 AM - 3:00 PM (5 hours)

This full-day, hands-on technical course is designed for Gas Safe Engineers.

Thu 15 Oct 2026

10:00 AM - 3:00 PM (5 hours)

This training session provides comprehensive information on the Ideal Logic Air monobloc heat pump system.

Fri 16 Oct 2026

9:00 AM - 4:00 PM (7 hours)

An informative course suitable for those with existing knowledge of air source heat pump (ASHP) technology. This 1-day course is designed to provide a comprehensive understanding of how a heat pump can be successfully integrated into your plantroom and controls solutions.

Fri 16 Oct 2026

10:00 AM - 3:00 PM (5 hours)

This training session provides comprehensive information on the Ideal Logic Air monobloc heat pump system.

Tue 20 Oct 2026

9:00 AM - 4:00 PM (7 hours)

A must-have for any heating engineer, a comprehensive 1-day electrical course. This course is BPEC Certified.

Tue 20 Oct 2026

10:00 AM - 3:00 PM (5 hours)

This full-day, hands-on technical course is designed for Gas Safe Engineers.

Tue 20 Oct 2026

10:00 AM - 3:00 PM (5 hours)

This full-day, hands-on technical course is designed for Gas Safe Engineers.

Wed 21 Oct 2026

9:00 AM - 4:00 PM (7 hours)

A must-have for any heating engineer, a comprehensive 1-day electrical course. This course is BPEC Certified.

Wed 21 Oct 2026

9:30 AM - 3:00 PM (5 hours 30 minutes)

A comprehensive half day course covering our commercial domestic hot water product range.

Wed 21 Oct 2026

10:00 AM - 3:00 PM (5 hours)

This full-day, hands-on technical course is designed for Gas Safe Engineers.

Wed 21 Oct 2026

10:00 AM - 3:00 PM (5 hours)

This training session provides comprehensive information on the Ideal Logic Air monobloc heat pump system.

Wed 21 Oct 2026

10:00 AM - 3:00 PM (5 hours)

This training session provides comprehensive information on the Ideal Logic Air monobloc heat pump system.

Thu 22 Oct 2026

10:00 AM - 3:00 PM (5 hours)

This full-day, hands-on technical course is designed for Gas Safe Engineers.

Thu 22 Oct 2026

10:00 AM - 3:00 PM (5 hours)

This training session provides comprehensive information on the Ideal Logic Air monobloc heat pump system.

Fri 23 Oct 2026

10:00 AM - 3:00 PM (5 hours)

This training session provides comprehensive information on the Ideal Logic Air monobloc heat pump system.

26 - 30 Oct 2026

1 week, 9:00 AM - 4:00 PM

Become certified to install, commission, service, and maintain split and mono-block heat pump systems using refrigerants and F-Gases.

Mon 26 Oct 2026

9:00 AM - 4:00 PM (7 hours)

An informative day designed to provide a comprehensive understanding of how a heat pump can be successfully integrated into your plant room and controls solutions.

Wed 28 Oct 2026

9:00 AM - 4:00 PM (7 hours)

A must-have for any heating engineer, a comprehensive 1-day electrical course. This course is BPEC Certified.

28 - 30 Oct 2026

3 days, 9:00 AM - 4:00 PM

Stop guessing, start diagnosing. Unlock the fault-finding skills and confidence that turn heating system and boiler breakdowns into first-time fixes.

2 - 4 Nov 2026

3 days, 9:00 AM - 4:00 PM

Build the skills and confidence to design, install, commission, and service Air Source Heat Pump systems to industry standards.

Mon 2 Nov 2026

9:00 AM - 4:00 PM (7 hours)

An informative day designed to provide a comprehensive understanding of how a heat pump can be successfully integrated into your plant room and controls solutions.

Tue 3 Nov 2026

9:00 AM - 4:00 PM (7 hours)

BPEC Hot Water Storage Systems (Unvented / G3) Training Course

Tue 3 Nov 2026

9:00 AM - 4:00 PM (7 hours)

Our in-person course is a full day of training, you won’t just sit and listen. You’ll build a complete system design from start to finish.

Tue 3 Nov 2026

9:30 AM - 3:00 PM (5 hours 30 minutes)

A dedicated half day course on our commercial gas boiler product range

Wed 4 Nov 2026

10:00 AM - 3:00 PM (5 hours)

This full-day, hands-on technical course is designed for Gas Safe Engineers.

Thu 5 Nov 2026

9:00 AM - 4:00 PM (7 hours)

This course is run over 1 day and is structured in a way that allows flexibility based on your experience.

Thu 5 Nov 2026

9:00 AM - 4:00 PM (7 hours)

Our in-person course is a full day of training, you won’t just sit and listen. You’ll build a complete system design from start to finish.

Thu 5 Nov 2026

10:00 AM - 3:00 PM (5 hours)

This full-day, hands-on technical course is designed for Gas Safe Engineers.

Fri 6 Nov 2026

9:00 AM - 4:00 PM (7 hours)

A comprehensive, combined 1-day programme covering all aspects of the Imax Xtra 2.

Fri 6 Nov 2026

10:00 AM - 3:00 PM (5 hours)

This training session provides comprehensive information on the Ideal Logic Air monobloc heat pump system.

Mon 9 Nov 2026

9:00 AM - 4:00 PM (7 hours)

A comprehensive, combined 1-day programme covering all aspects of the Evomax 2.

9 - 13 Nov 2026

1 week, 9:00 AM - 4:00 PM

Become certified to install, commission, service, and maintain split and mono-block heat pump systems using refrigerants and F-Gases.

9 - 13 Nov 2026

1 week, 9:00 AM - 4:00 PM

Become certified to install, commission, service, and maintain split and mono-block heat pump systems using refrigerants and F-Gases.

Tue 10 Nov 2026

10:00 AM - 3:00 PM (5 hours)

This training session provides comprehensive information on the Ideal Logic Air monobloc heat pump system.

Wed 11 Nov 2026

9:00 AM - 4:00 PM (7 hours)

1 day training course on the Ideal Heating POD Heat Interface Unit

Thu 12 Nov 2026

9:00 AM - 4:00 PM (7 hours)

An informative course suitable for those with existing knowledge of air source heat pump (ASHP) technology. This 1-day course is designed to provide a comprehensive understanding of how a heat pump can be successfully integrated into your plantroom and controls solutions.

Fri 13 Nov 2026

9:00 AM - 4:00 PM (7 hours)

An informative course suitable for those with existing knowledge of air source heat pump (ASHP) technology. This 1-day course is designed to provide a comprehensive understanding of how a heat pump can be successfully integrated into your plantroom and controls solutions.

Fri 13 Nov 2026

9:00 AM - 4:00 PM (7 hours)

This course is run over 1 day and is structured in a way that allows flexibility based on your experience.

16 - 18 Nov 2026

3 days, 9:00 AM - 4:00 PM

Stop guessing, start diagnosing. Unlock the fault-finding skills and confidence that turn heating system and boiler breakdowns into first-time fixes.

Mon 16 Nov 2026

10:00 AM - 3:00 PM (5 hours)

This full-day, hands-on technical course is designed for Gas Safe Engineers.

Tue 17 Nov 2026

10:00 AM - 3:00 PM (5 hours)

This full-day, hands-on technical course is designed for Gas Safe Engineers.

Tue 17 Nov 2026

10:00 AM - 3:00 PM (5 hours)

This training session provides comprehensive information on the Ideal Logic Air monobloc heat pump system.

Wed 18 Nov 2026

9:00 AM - 4:00 PM (7 hours)

A BPEC certificated course covering Water Regulations and Byelaws (1999).

Wed 18 Nov 2026

10:00 AM - 3:00 PM (5 hours)

This training course is designed for experienced ASHP installers prior to installing their first HP290.

Wed 18 Nov 2026

10:00 AM - 3:00 PM (5 hours)

This training session provides comprehensive information on the Ideal Logic Air monobloc heat pump system.

19 - 20 Nov 2026

2 days, 9:00 AM - 4:00 PM

Become an expert in advanced system configuration and fault diagnostics for the Logic and Vogue range.

Thu 19 Nov 2026

9:00 AM - 4:00 PM (7 hours)

BPEC Hot Water Storage Systems (Unvented / G3) Training Course

Thu 19 Nov 2026

10:00 AM - 3:00 PM (5 hours)

This training course is designed for experienced ASHP installers prior to installing their first HP290.

Fri 20 Nov 2026

9:00 AM - 4:00 PM (7 hours)

A comprehensive, combined 1-day programme covering all aspects of the Imax Xtra 2.

Fri 20 Nov 2026

10:00 AM - 3:00 PM (5 hours)

This training session provides comprehensive information on the Ideal Logic Air monobloc heat pump system.

Mon 23 Nov 2026

9:00 AM - 4:00 PM (7 hours)

A comprehensive, combined 1-day programme covering all aspects of the Evomax 2.

Mon 23 Nov 2026

9:00 AM - 4:00 PM (7 hours)

An informative day designed to provide a comprehensive understanding of how a heat pump can be successfully integrated into your plant room and controls solutions.

23 Nov 2026 - 3 Dec 2026

8 days, split over 2 weeks

Our 8 day course is designed for experienced heating engineers who wish to begin working with heat pumps. The Heat Training Grant is funded by UK Government. You can find out more about the grant here https://www.gov.uk/government/news/thousands-of-heat-pump-installers-to-be-trained-for-fraction-of-the-price. To be eligible for this course, you must attend both weeks.

Mon 23 Nov 2026

10:00 AM - 3:00 PM (5 hours)

This full-day, hands-on technical course is designed for Gas Safe Engineers.

Mon 23 Nov 2026

10:00 AM - 3:00 PM (5 hours)

This full-day, hands-on technical course is designed for Gas Safe Engineers.

Tue 24 Nov 2026

9:00 AM - 4:00 PM (7 hours)

A comprehensive, combined 1-day programme covering all aspects of the Imax Xtra 2.

Tue 24 Nov 2026

10:00 AM - 3:00 PM (5 hours)

This full-day, hands-on technical course is designed for Gas Safe Engineers.

Tue 24 Nov 2026

10:00 AM - 3:00 PM (5 hours)

This training session provides comprehensive information on the Ideal Logic Air monobloc heat pump system.

Tue 24 Nov 2026

10:00 AM - 3:00 PM (5 hours)

This training session provides comprehensive information on the Ideal Logic Air monobloc heat pump system.

Wed 25 Nov 2026

10:00 AM - 3:00 PM (5 hours)

This training session provides comprehensive information on the Ideal Logic Air monobloc heat pump system.

Fri 27 Nov 2026

9:00 AM - 4:00 PM (7 hours)

A comprehensive, combined 1-day programme covering all aspects of the Evomax 2.

Fri 27 Nov 2026

9:00 AM - 4:00 PM (7 hours)

1 day training course on the Ideal Heating POD Heat Interface Unit

30 Nov 2026 - 1 Dec 2026

2 days, 9:00 AM - 4:00 PM

Become an expert in advanced system configuration and fault diagnostics for the Logic and Vogue range.

30 Nov 2026 - 1 Dec 2026

2 days, 9:00 AM - 4:00 PM

A practical 2-day course for qualified F Gas engineers that refreshes key procedures and guides learners through a full split air to air system installation, building the skills and confidence to install safely and to industry standards.

Tue 1 Dec 2026

10:00 AM - 3:00 PM (5 hours)

This training session provides comprehensive information on the Ideal Logic Air monobloc heat pump system.

Wed 2 Dec 2026

9:00 AM - 4:00 PM (7 hours)

A comprehensive, combined 1-day programme covering all aspects of the Evomax 2.

Wed 2 Dec 2026

10:00 AM - 3:00 PM (5 hours)

This full-day, hands-on technical course is designed for Gas Safe Engineers.

Thu 3 Dec 2026

9:00 AM - 4:00 PM (7 hours)

An informative course suitable for those with existing knowledge of air source heat pump (ASHP) technology. This 1-day course is designed to provide a comprehensive understanding of how a heat pump can be successfully integrated into your plantroom and controls solutions.

Thu 3 Dec 2026

10:00 AM - 3:00 PM (5 hours)

This training session provides comprehensive information on the Ideal Logic Air monobloc heat pump system.

7 - 9 Dec 2026

3 days, 9:00 AM - 4:00 PM

Build the skills and confidence to design, install, commission, and service Air Source Heat Pump systems to industry standards.

Mon 7 Dec 2026

9:00 AM - 4:00 PM (7 hours)

An informative day designed to provide a comprehensive understanding of how a heat pump can be successfully integrated into your plant room and controls solutions.

Mon 7 Dec 2026

9:00 AM - 4:00 PM (7 hours)

A comprehensive, combined 1-day programme covering all aspects of the Imax Xtra 2.

Mon 7 Dec 2026

10:00 AM - 3:00 PM (5 hours)

This full-day, hands-on technical course is designed for Gas Safe Engineers.

Mon 7 Dec 2026

10:00 AM - 3:00 PM (5 hours)

This full-day, hands-on technical course is designed for Gas Safe Engineers.

Tue 8 Dec 2026

9:00 AM - 4:00 PM (7 hours)

A comprehensive, combined 1-day programme covering all aspects of the Evomax 2.

Tue 8 Dec 2026

9:00 AM - 4:00 PM (7 hours)

This course is run over 1 day and is structured in a way that allows flexibility based on your experience.