Upcoming Courses

Wed 7 Oct 2026

10:00 AM - 3:00 PM (5 hours)

This training session provides comprehensive information on the Ideal Logic Air monobloc heat pump system.

Wed 7 Oct 2026

10:00 AM - 3:00 PM (5 hours)

This training session provides comprehensive information on the Ideal Logic Air monobloc heat pump system.

Thu 8 Oct 2026

9:00 AM - 4:00 PM (7 hours)

An informative half day course designed to cover our commercial electric boiler product range

Thu 8 Oct 2026

9:00 AM - 4:00 PM (7 hours)

A must-have for any heating engineer, a comprehensive 1-day electrical course. This course is BPEC Certified.

Fri 9 Oct 2026

9:00 AM - 4:00 PM (7 hours)

1 day training course on the Ideal Heating POD Heat Interface Unit

Mon 12 Oct 2026

9:00 AM - 4:00 PM (7 hours)

BPEC Hot Water Storage Systems (Unvented / G3) Training Course

12 - 14 Oct 2026

3 days, 9:00 AM - 4:00 PM

Stop guessing, start diagnosing. Unlock the fault-finding skills and confidence that turn heating system and boiler breakdowns into first-time fixes.

Mon 12 Oct 2026

9:00 AM - 4:00 PM (7 hours)

This course is run over 1 day and is structured in a way that allows flexibility based on your experience.

Tue 13 Oct 2026

9:00 AM - 4:00 PM (7 hours)

A comprehensive, combined 1-day programme covering all aspects of the Evomax 2.

Wed 14 Oct 2026

10:00 AM - 3:00 PM (5 hours)

This training course is designed for experienced ASHP installers prior to installing their first HP290.

Thu 15 Oct 2026

9:00 AM - 4:00 PM (7 hours)

A comprehensive, combined 1-day programme covering all aspects of the Evomax 2.

15 - 16 Oct 2026

2 days, 9:00 AM - 4:00 PM

A practical 2-day course for qualified F Gas engineers that refreshes key procedures and guides learners through a full split air to air system installation, building the skills and confidence to install safely and to industry standards.

Thu 15 Oct 2026

9:30 AM - 3:00 PM (5 hours 30 minutes)

A dedicated half day course on our commercial gas boiler product range

Thu 15 Oct 2026

10:00 AM - 3:00 PM (5 hours)

This full-day, hands-on technical course is designed for Gas Safe Engineers.

Thu 15 Oct 2026

10:00 AM - 3:00 PM (5 hours)

This training session provides comprehensive information on the Ideal Logic Air monobloc heat pump system.

Fri 16 Oct 2026

9:00 AM - 4:00 PM (7 hours)

An informative course suitable for those with existing knowledge of air source heat pump (ASHP) technology. This 1-day course is designed to provide a comprehensive understanding of how a heat pump can be successfully integrated into your plantroom and controls solutions.

Fri 16 Oct 2026

10:00 AM - 3:00 PM (5 hours)

This training session provides comprehensive information on the Ideal Logic Air monobloc heat pump system.

Tue 20 Oct 2026

9:00 AM - 4:00 PM (7 hours)

A must-have for any heating engineer, a comprehensive 1-day electrical course. This course is BPEC Certified.

Tue 20 Oct 2026

10:00 AM - 3:00 PM (5 hours)

This full-day, hands-on technical course is designed for Gas Safe Engineers.

Tue 20 Oct 2026

10:00 AM - 3:00 PM (5 hours)

This full-day, hands-on technical course is designed for Gas Safe Engineers.

Wed 21 Oct 2026

9:00 AM - 4:00 PM (7 hours)

A must-have for any heating engineer, a comprehensive 1-day electrical course. This course is BPEC Certified.

Wed 21 Oct 2026

9:30 AM - 3:00 PM (5 hours 30 minutes)

A comprehensive half day course covering our commercial domestic hot water product range.

Wed 21 Oct 2026

10:00 AM - 3:00 PM (5 hours)

This full-day, hands-on technical course is designed for Gas Safe Engineers.

Wed 21 Oct 2026

10:00 AM - 3:00 PM (5 hours)

This training session provides comprehensive information on the Ideal Logic Air monobloc heat pump system.

Wed 21 Oct 2026

10:00 AM - 3:00 PM (5 hours)

This training session provides comprehensive information on the Ideal Logic Air monobloc heat pump system.

Thu 22 Oct 2026

10:00 AM - 3:00 PM (5 hours)

This full-day, hands-on technical course is designed for Gas Safe Engineers.

Thu 22 Oct 2026

10:00 AM - 3:00 PM (5 hours)

This training session provides comprehensive information on the Ideal Logic Air monobloc heat pump system.

Fri 23 Oct 2026

10:00 AM - 3:00 PM (5 hours)

This training session provides comprehensive information on the Ideal Logic Air monobloc heat pump system.

26 - 30 Oct 2026

1 week, 9:00 AM - 4:00 PM

Become certified to install, commission, service, and maintain split and mono-block heat pump systems using refrigerants and F-Gases.

Mon 26 Oct 2026

9:00 AM - 4:00 PM (7 hours)

An informative day designed to provide a comprehensive understanding of how a heat pump can be successfully integrated into your plant room and controls solutions.

Wed 28 Oct 2026

9:00 AM - 4:00 PM (7 hours)

A must-have for any heating engineer, a comprehensive 1-day electrical course. This course is BPEC Certified.

28 - 30 Oct 2026

3 days, 9:00 AM - 4:00 PM

Stop guessing, start diagnosing. Unlock the fault-finding skills and confidence that turn heating system and boiler breakdowns into first-time fixes.

2 - 4 Nov 2026

3 days, 9:00 AM - 4:00 PM

Build the skills and confidence to design, install, commission, and service Air Source Heat Pump systems to industry standards.

Mon 2 Nov 2026

9:00 AM - 4:00 PM (7 hours)

An informative day designed to provide a comprehensive understanding of how a heat pump can be successfully integrated into your plant room and controls solutions.

Tue 3 Nov 2026

9:00 AM - 4:00 PM (7 hours)

BPEC Hot Water Storage Systems (Unvented / G3) Training Course

Tue 3 Nov 2026

9:00 AM - 4:00 PM (7 hours)

Our in-person course is a full day of training, you won’t just sit and listen. You’ll build a complete system design from start to finish.

Tue 3 Nov 2026

9:30 AM - 3:00 PM (5 hours 30 minutes)

A dedicated half day course on our commercial gas boiler product range

Wed 4 Nov 2026

10:00 AM - 3:00 PM (5 hours)

This full-day, hands-on technical course is designed for Gas Safe Engineers.

Thu 5 Nov 2026

9:00 AM - 4:00 PM (7 hours)

This course is run over 1 day and is structured in a way that allows flexibility based on your experience.

Thu 5 Nov 2026

9:00 AM - 4:00 PM (7 hours)

Our in-person course is a full day of training, you won’t just sit and listen. You’ll build a complete system design from start to finish.

Thu 5 Nov 2026

10:00 AM - 3:00 PM (5 hours)

This full-day, hands-on technical course is designed for Gas Safe Engineers.

Fri 6 Nov 2026

9:00 AM - 4:00 PM (7 hours)

A comprehensive, combined 1-day programme covering all aspects of the Imax Xtra 2.

Fri 6 Nov 2026

10:00 AM - 3:00 PM (5 hours)

This training session provides comprehensive information on the Ideal Logic Air monobloc heat pump system.

Mon 9 Nov 2026

9:00 AM - 4:00 PM (7 hours)

A comprehensive, combined 1-day programme covering all aspects of the Evomax 2.

9 - 13 Nov 2026

1 week, 9:00 AM - 4:00 PM

Become certified to install, commission, service, and maintain split and mono-block heat pump systems using refrigerants and F-Gases.

9 - 13 Nov 2026

1 week, 9:00 AM - 4:00 PM

Become certified to install, commission, service, and maintain split and mono-block heat pump systems using refrigerants and F-Gases.

Tue 10 Nov 2026

10:00 AM - 3:00 PM (5 hours)

This training session provides comprehensive information on the Ideal Logic Air monobloc heat pump system.

Wed 11 Nov 2026

9:00 AM - 4:00 PM (7 hours)

1 day training course on the Ideal Heating POD Heat Interface Unit

Thu 12 Nov 2026

9:00 AM - 4:00 PM (7 hours)

An informative course suitable for those with existing knowledge of air source heat pump (ASHP) technology. This 1-day course is designed to provide a comprehensive understanding of how a heat pump can be successfully integrated into your plantroom and controls solutions.

Fri 13 Nov 2026

9:00 AM - 4:00 PM (7 hours)

An informative course suitable for those with existing knowledge of air source heat pump (ASHP) technology. This 1-day course is designed to provide a comprehensive understanding of how a heat pump can be successfully integrated into your plantroom and controls solutions.

Fri 13 Nov 2026

9:00 AM - 4:00 PM (7 hours)

This course is run over 1 day and is structured in a way that allows flexibility based on your experience.

16 - 18 Nov 2026

3 days, 9:00 AM - 4:00 PM

Stop guessing, start diagnosing. Unlock the fault-finding skills and confidence that turn heating system and boiler breakdowns into first-time fixes.

Mon 16 Nov 2026

10:00 AM - 3:00 PM (5 hours)

This full-day, hands-on technical course is designed for Gas Safe Engineers.